Change the Boss’nX site title, location and map position

The Site Information page of a Boss’nX supervision stores the site title, its location and its position on the map as latitude and longitude. This position can serve as a reference for the geographic restrictions of QR accesses.

Before you start

• You have the Manage topology right in the relevant supervision.
• From hypervision, first open this supervision with the context switch.

Open the Site Information page

1. Open Menu → Site Information, in the Administration family. On a tablet or phone, Menu is at the right of the bottom bar; the Boss navigation describes these entry points.
2. Wait for the loading to finish. If an error appears, do not replace the existing information from an empty form: leave the page, then reopen it.

Fill in the title, location and position

1. Fill in Site Title and Location, for example “Demonstration site” and “Paris, France”, fictional examples to replace.
2. Check Time zone: it is used for the times shown in alarm e-mails and is deduced from the map position until you pick one yourself.
3. Under Map Position, click the location of the site, or fill in Latitude and Longitude.
4. Respect the limits: latitude between −90 and 90, longitude between −180 and 180. Decimals are allowed. Fill in both coordinates to define a complete position.

When no position is filled in, the map may suggest your browser’s position. Check that it is really the site: if you work remotely, the building is not where you are. You can also choose the point on the map or enter the coordinates without using this suggestion.

Resolving address… indicates the search for a location text from the coordinates. A custom text already entered is kept: moving the point does not necessarily replace Location. If the text remains empty or does not match the site, fill it in yourself.

Save the information

1. Review the position and the Location text.
2. Click Save.
3. Wait for Site information saved.. The page remains open.

The Back button, the arrow at the top left, leaves the page without saving: it does not replace Save.

Check the result

Leave the page, then reopen Site Information to check the values that were kept. If you moved the site, check the accesses that use its position in the geographic restrictions of QR codes. Saving coordinates confirms neither an available weather measurement nor the actual position of a guest.

Cancel or restore values

• To cancel changes that are not yet saved, leave and reopen the page.
• After a save, enter the old values again, then save them.
• Emptying a field does not necessarily erase old information permanently: for a complete deletion, first have support confirm the procedure.

Troubleshooting

Message or observation	Action
Invalid latitude., Invalid longitude. or a browser indication	Correct the field within its limits, then try again.
Failed to save.	Note the message, then reopen the page to check the saved state before trying again.

If the loading error or the save failure persists, write to support@can-nx.com with the context and the attempts already made, without a private link or secret.

French labels: Menu → Informations du site, Titre du site, Localisation, Fuseau horaire, Position sur la carte, Latitude, Longitude, Enregistrer, Informations du site enregistrées., Latitude invalide., Longitude invalide., Échec de l’enregistrement.