Boss’nX Time Programming: find, enable and run a scenario

The Time Programming page of a Boss’nX supervision lists the building’s scenarios with their time, conditions and number of actions. There you find a scenario, enable or disable it, and start it on demand with Execute.

For users, administrators and installers: the controls shown depend on your account’s permissions. A scenario can act on several devices; identify it and check its use before running it. To create or edit a scenario, follow the creation guide.

Open Time Programming

1. Open the supervision of the relevant building. From a hypervision, first enter this supervision.
2. In the header, open Menu, then Time programming, in the Schedules family. On a tablet or phone, Menu is at the right of the bottom bar.

The Boss’nX navigation guide describes the Menu and your bar of pinned pages in detail.

Find a scenario

1. Enter part of the name in Search for a scenario….
2. Choose All, Active or Inactive to filter by activation.
3. Identify the card by its name. It shows the time or the solar event when there is one, the conditions, the number of actions and the associated gateways.

If nothing matches, clear the search and return to All. A card can summarize several triggers: review the full scenario rather than only the large time displayed.

The page shows the scenarios referenced in Boss’nX. Scenarios prepared separately in Link’nX are not necessarily listed.

Check the required permissions

In the role configuration, three permissions govern scenarios:

Permission	Controls concerned
View and run scenarios	View the page and use Execute
Operate scenarios	Enable or disable, open the pencil and adjust times, values and delays
Edit scenarios	Create, rename, restructure, duplicate and delete

In the editor, the Tuning mode banner calls this last permission “Manage Scenarios”. Only the permissions of the signed-in account’s role count, not the title “user” or “administrator”. Have the administrator check the required permissions together, using the roles and their permissions.

Enable or disable a scenario

1. On the card, locate the small switch at the top right, near the name, with the tooltip Enabled.
2. Click once, then wait for the card to update. Its status dot shows Active or Inactive.
3. Check the result with the Active or Inactive filter, then return to All to see the whole list again.

A view-only account sees an Enabled or Disabled badge instead of the switch.

Activation concerns the schedule only: disabling does not return the devices to their previous state and is not an emergency stop. If an action has already taken place, check the actual state of the relevant device.

Run a scenario manually

1. Check the name, the targeted devices and the expected consequences, if necessary with the person who prepared the scenario.
2. Click Execute once, the button with a triangle at the bottom of the card. The request is sent immediately, without any further confirmation.
3. Wait for the message Scenario executed or Failed to execute scenario.

Do not click repeatedly to get an effect, and do not count on manual execution to bypass the conditions or the activation of the scenario.

Check the result

Scenario executed confirms that the request was sent, not the physical state of each device. Then check the expected result on the devices and their available status feedback.

Troubleshooting

Symptom	Check
Time programming missing from the Menu	Check the chosen supervision, then the View and run scenarios permission: the Menu only lists the pages your account can open.
Card not found	Clear the search, choose All and check the context. A separate Link’nX scenario may require its own procedure.
Pencil or switch missing	Have the Operate scenarios permission checked: an account that can run scenarios does not necessarily have the right to edit them.
Failed to update scenario	Check whether the state has changed in the list before trying again. If the error persists, do not keep toggling.
Failed to execute scenario or no effect after Execute	Note the scenario, the message obtained, the time of the attempt and the relevant device. Have the times, conditions, values and gateways checked by an authorized person, with the times and conditions guide and the actions guide.

If the problem persists after these checks or the result remains uncertain, contact support@can-nx.com with this context and the attempts made. A screenshot without sensitive data can help; never send a password or access key.

French labels: Menu → Programmation horaire, Rechercher un scénario…, Tous / Actifs / Inactifs, Exécuter, Scénario exécuté, Voir et exécuter les scénarios, Faire fonctionner les scénarios, Modifier les scénarios, and “Gérer les scénarios” in the Mode ajustement banner.