---
title: Samsung TV and KNX integration with Link’nX
description: "Control a Samsung TV from KNX with Link’nX: power, volume, mute, channels, input, apps and status feedback, with step-by-step setup guides."
canonical: https://wiki.can-nx.com/en/integrations/samsung-tv/
language: en
---

# Samsung TV and KNX integration with Link’nX

With Link’nX, a Samsung TV is controlled from the KNX bus and from the installation’s scenarios: power, volume, mute, channels, playback, input, apps and keys. Its power state, volume level and mute state can be read back on the bus. The available functions vary depending on the model and its settings.

## What the Samsung TV integration does

| Need | Where to configure it | Guide |
| --- | --- | --- |
| Switch the TV on or off from a KNX button | Gateway table, **Set power** row | [KNX commands and feedback of a TV](https://wiki.can-nx.com/en/guides/link-tv-knx/) |
| Set the volume, mute or change channel from the bus | Gateway table, **Actions** tab | [KNX commands and feedback of a TV](https://wiki.can-nx.com/en/guides/link-tv-knx/) |
| Read power, volume or mute back on the bus | Gateway table, second tab | [KNX commands and feedback of a TV](https://wiki.can-nx.com/en/guides/link-tv-knx/) |
| Set the input, set a channel, launch an app or send a key | **Samsung TV** action | [Control a Samsung TV](https://wiki.can-nx.com/en/guides/link-samsung-tv-actions/) |
| Wake the TV over the network | **MAC address** in the declaration, then the **Power on** command | [Declare the TV](https://wiki.can-nx.com/en/guides/link-tv-devices/) |

## Step-by-step commissioning

1. [Declare the TV](https://wiki.can-nx.com/en/guides/link-tv-devices/) in **Audio & Media → Samsung TV**: name, IPv4 address and, for network wake-up, MAC address.
2. [Map its commands and feedback to KNX group addresses](https://wiki.can-nx.com/en/guides/link-tv-knx/). Save each tab before switching to another.
3. [Prepare the Samsung TV actions](https://wiki.can-nx.com/en/guides/link-samsung-tv-actions/), in particular for the commands missing from the KNX table, then [add them to a saved scenario](https://wiki.can-nx.com/en/guides/link-scenario-save/), started if needed by a [KNX trigger](https://wiki.can-nx.com/en/guides/link-trigger-knx/).
4. Test each command on the TV.

If something goes wrong, the [Samsung actions guide](https://wiki.can-nx.com/en/guides/link-samsung-tv-actions/) covers network wake-up, volume setting with no effect and commands that get no response.

## Good to know

- Have the model’s compatibility and its command authorizations confirmed. The **Pairing Token** is optional to save the declaration; the field help says it is retrieved after the first connection.
- KNX commands use DPT 1.001 and the volume DPT 5.001 (0 to 100). For pulses (volume, channel, mute toggle, **Stop**), a release telegram 0 does not execute a second command.
- **Set input**, **Set channel**, **Launch app** and **Send key** are prepared only as scenario actions. The **HDMI** choice does not designate a numbered port.
- Absolute volume and mute control depend on support by the model, notably UPnP RenderingControl.
- A **Power state** feedback of 0 may also mean that the TV is unreachable.

For a Sony TV, see [Sony TV](https://wiki.can-nx.com/en/integrations/sony-tv/); for other players, [Audio and multimedia](https://wiki.can-nx.com/en/usages/audio-multimedia/).

## All Samsung TV guides

### Devices and integrations

- [Samsung TV in a Link’nX scenario: power, volume, input and channels](https://wiki.can-nx.com/en/guides/link-samsung-tv-actions/)
- [Add a Sony or Samsung TV in Link’nX: IP address, PSK and pairing token](https://wiki.can-nx.com/en/guides/link-tv-devices/)

### Protocols, imports and monitoring

- [Samsung or Sony TV and KNX: map commands and feedback in Link’nX](https://wiki.can-nx.com/en/guides/link-tv-knx/)