---
title: Control Airzone air conditioning from a Link’nX scenario
description: Create an Airzone action in Link’nX to switch on, change the mode, set the fan speed, the timer or the slats of one or more air-conditioning zones.
canonical: https://wiki.can-nx.com/en/guides/link-aidoo-action/
language: en
product: Link’nX
audience:
  - administrateur
  - installateur
context: "Link’nX web: Airzone scenario actions, for declared Airzone devices"
---

# Control Airzone air conditioning from a Link’nX scenario

Context: Link’nX web: Airzone scenario actions, for declared Airzone devices

An Airzone action in Link’nX sends a command to one or more Airzone air-conditioning zones when a scenario runs it: on or off, mode, timer, fan speed, air ionization, slat swing and position, temperature setpoints.

Intended for installers and administrators. For a KNX object to control a zone directly, without a scenario, use the [Airzone KNX gateway table](https://wiki.can-nx.com/en/guides/link-aidoo-gateway/) instead.

## Before you start

- The devices are [declared in Link’nX](https://wiki.can-nx.com/en/guides/link-aidoo-device/) with their system and zone identifiers.
- The functions to control are available on each equipment concerned. Have the installer confirm them: the command list is the same for all devices and does not reflect the air conditioner’s capabilities.

## Create the action

1. Open **Actions**, click **Add**, then choose **Airzone** in **Select an action type**.
2. Fill in **Name**, required and limited to 64 characters.
3. In **Airzone device**, check the devices to control. **Select all** checks all the devices offered. The field then shows the first name followed by **(+N others)**: reopen the list to check the hidden names.
4. In **Airzone command**, choose the command, then fill in its parameter using the table below. After each change of command, choose the desired parameter again or re-enter its value.
5. For a temperature setpoint or an ionization threshold, follow the [Airzone values guide](https://wiki.can-nx.com/en/guides/link-aidoo-values/) and enter the desired value, even if a value is already displayed.
6. Reread the name, the devices, the command and the parameter, then click the **floppy disk at the bottom right**. Wait for **Success!** and find the action in the list.

## Choose the command and its parameter

| Command | Parameter to choose |
| --- | --- |
| **ON** or **OFF** | No additional parameter |
| **Mode selection** | In **Mode**: **Auto**, **Cooling**, **Heating**, **Fan**, **Dry**, **Stop** or **Auxiliary heat**, depending on the system’s capabilities |
| **Timer** | In **Time**: **OFF** to deactivate an existing timer, or **Sleep in 30 minutes**, **Sleep in 60 minutes**, **Sleep in 90 minutes** |
| **Fan speed** | In **Speed**: **Auto** or **Speed 1** to **Speed 7**, depending on the equipment; speeds 4 to 7 concern compatible individual zone modules |
| **Air ionization mode** | In **Mode**: **OFF**, **ON** or **Auto**, on compatible equipment |
| **Vertical swing** or **Horizontal swing** | In **Mode**: **Disable swing (OFF)** or **Activate swing (ON)** |
| **Vertical blade position** or **Horizontal blade position** | In **Position**: **Position 0**, **Position 1**, **Position 2** or **Position 3**, depending on the desired position and the equipment’s capabilities |

Temperature setpoints and ionization thresholds expect a numeric value, described in the [Airzone values guide](https://wiki.can-nx.com/en/guides/link-aidoo-values/).

## Add the action to a scenario

[Add this action to the scenario](https://wiki.can-nx.com/en/guides/link-compose-scenario/), check its order and delay, then save the scenario. A created action is not automatically added to existing scenarios.

In a scenario’s details, **Airzone device** shows the associated devices for viewing only: choosing a name in this list does not change the saved target. Open the action to change its recipients.

## Edit an existing action

Open the action by its name or its pencil, correct the parameters and follow the [action change validation](https://wiki.can-nx.com/en/guides/link-action-edit/). If the affected scenarios are presented, check them before **SAVE**; **CANCEL** takes you back to the form. Wait for **Updated!**.

## Check the result

**Success!** confirms that the command is saved, not that the air conditioning executed it. Before a [run](https://wiki.can-nx.com/en/guides/link-run/), check the targeted zones and the planned changes in operation. Then run the scenario and watch each zone: power, mode, setpoint, fan or slats.

## Troubleshooting

If the action has no effect, if a mode does not suit the equipment or if a parameter remains uncertain, follow the [Airzone troubleshooting](https://wiki.can-nx.com/en/guides/link-aidoo-help/). If these checks do not resolve it, contact support@can-nx.com.