---
title: Find or delete equipment in Emergy’nX
description: Find Emergy’nX equipment by name, type, phase and max power, open its configuration or delete it, then check that the equipment list is updated.
canonical: https://wiki.can-nx.com/en/guides/emergy-equipment-list/
language: en
product: Emergy’nX
audience:
  - administrateur
  - installateur
context: "Emergy’nX: Equipment list of a real project, Edit, Duplicate and Delete actions"
---

# Find or delete equipment in Emergy’nX

Context: Emergy’nX: Equipment list of a real project, Edit, Duplicate and Delete actions

The **Equipment** list in Emergy’nX shows the configuration of each device in the project: name, type, phase and maximum power. From this list, you open equipment to review or edit its parameters, or you delete a configuration that is no longer needed.

Intended for administrators and installers in charge of configuring the real project. To view a power value or request Auto/OFF/ON day to day, use [the dashboard cards](https://wiki.can-nx.com/en/guides/emergy-control/) instead.

## Find the configuration of a piece of equipment

1. Check the project name in the top bar, then open **Equipment** in the left menu. On a phone, first open the three lines **Toggle navigation**.
2. Wait for the list to load. Find the device by its **Name**, then check **Type**, **Phase** and **Max Power**.
3. In **Actions**, on the right of the row, click the **Edit** pencil. On a narrow screen, scroll the table horizontally to reach the actions.
4. Check the equipment name on the edit page before filling in a field.
5. If you only want to view the configuration, then go back with the **Back** arrow at the top left, without changing the fields.

**Max Power** is a configuration parameter in kW, separate from the instantaneous power shown on the dashboard.

The two-sheet **Duplicate** button opens a copy draft, which is only stored when you save; this path is detailed in [create, edit or duplicate equipment](https://wiki.can-nx.com/en/guides/emergy-equipment-create/). It is not a way to fix missing data on existing equipment.

## Delete a configuration that is no longer needed

The confirmation states that the deletion **cannot be undone**. First check with the person responsible for the installation that this configuration really must be removed.

1. In **Equipment**, identify the row and check the name and the type.
2. Click the **Delete** trash can on the right of this row.
3. In **Delete Equipment**, reread the name shown. Click **Cancel** if it is not the right device or if you want to keep it.
4. If the removal is really intended, click **Delete** in the confirmation.

This removal concerns the configuration in Emergy’nX and tells you nothing about the state of the physical device, powered or stopped: do not use it as a power-off procedure, nor as an assurance that the power supply is maintained.

## Check the result

After a deletion, wait for the update, then check that the row no longer appears in the list of the same project. Check the list itself: the confirmation closing does not on its own indicate that the removal succeeded.

## Troubleshooting

| Display | Check and next step |
| --- | --- |
| **No equipment configured yet** | Check the project. If known equipment should appear, have the situation confirmed before creating copies. |
| **Failed to load equipment** | Check your connection, then reopen the section. If the problem persists, contact support. |
| The equipment no longer opens from the list | Go back with **Back**, wait for the list and look for the same name. If the problem persists, contact support. |
| The **Equipment** section does not appear | Check the [demo, mobile and TV mode](https://wiki.can-nx.com/en/guides/emergy-access/) variants. This symptom alone does not indicate a missing license. |
| The row is still present after a deletion and reopening the list | Contact support without repeating deletions, because the result is uncertain. |

For any persistent difficulty, write to support@can-nx.com with the project, the equipment name, any message displayed and the steps actually tried.

French labels: **Équipements**, **Nom**, **Type**, **Phase**, **Puissance max**, **Actions**, **Modifier**, **Dupliquer**, **Supprimer**, **Annuler** and **Précédent**.